Basic Info.
Operation Mode
Wire / Remote Control
Speaker System
Optional Combination
Application
Stage Performance
Hf
2407 Neodymium Tweeter
Lf
2262HPL/2268HPL Neodymium Woofer
Finish
Environmental Waterproof
Amplifier
with Inside Amplifier
Transport Package
Packaged in Carton Case or Flight Case
Product Description
Event Audio Vrx932lap Professional Powered Line Array Active Speaker
12 in. Two-Way Powered Line Array Speaker System
powered, lightweight, compact 12" two-way line-array speaker system
12" line array system
Light weight active line array
Amplified line array
Birch plywood line array speakerThe VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.Active line array system----Features:
1. Active, with inside power amplifier
2. birch plywood cabinet
3. neodymium loudspeakers
4. Deft design
5. Light weight VRX932LAP Active line array system--------ApplicationA. Music playback and sound reinforcement in MID-size venues
B. Entertainers, corporate A/V professionals and sound system hire companies
C. Permanent Installation
Revelant Collocation:
1.VRX918SP active subwoofer
2.VRX-AF suspension kit---Used for hanging line array systemSpecification of VRX932LAP line array active speaker:Specification of VRX Active |
Model | VRX932LAP | VRX918SP |
Frequency Range(-10dB) | 55Hz-20kHz | 30Hz-220Hz |
Frequency Response(±3dB) | 65Hz-20kHz | 35Hz-220Hz |
Coverage Pattern | 100*15 nominal | / |
Maximum Peak Output | 115B SPL at 1m | 120B SPL at 1m |
LF Driver | 1*2262HPL 305MM (12in) dual voice coil Differential Driver woofer with nenodymium-magnet | 1*2268HPL 457MM (18in) dual voice coil Differential Driver woofer with nenodymium-magnet |
HF Driver | 3*2408H 38mm(1.5in) voice coil neodymium compression driver | / |
Nominal Impedance | LF:8ohms HF:8ohms | LF:8ohms |
DPC-2 Intermal Amplification Output (at nominal load) | 1600 Watts Peak, 800 Watts Continuous | 1600 Watts Peak, 800 Watts Continuous |
DPC-2 Output as (Continuous IEC shaped pink noise into rated load impedance) | LF: 800 Watts,HF: 120Watts | LF: 800 Watts |
Audio Input Connector | XLR with loop through | XLR with loop through |
User Controls | Input Attenuator (0-16dB) ACS (Array Configuration Selector) HF level adjustment (+3dB ,0dB,-3dB) | Best option 90Hz Low Pass 90Hz High-Pass enable/disable for XLR loop thru |
Signal Processing | DSP based, resident in Input Module | DSP based, resident in Input Module |
System Management | DSP based limiters for mechnical and thermal protection. | DSP based limiters for mechnical and thermal protection. |
AC Power Operating Range | 90-132 VAC or 216-264 VAC, 50/60Hz | 90-132 VAC or 216-264 VAC, 50/60Hz |
AC Line Voltage | User selectable: 120V/240V (-15%,+10%) | User selectable: 120V/240V (-15%,+10%) |
AC Input Connecotr | PowerCon (NAC 3MPA) | PowerCon (NAC 3MPA) |
AC Loop Through Connector | PowerCon (NAC 3MPB) | PowerCon (NAC 3MPB) |
AC Current Requirements | 5A | 5A |
Enclosure | 25/18mm birch plywood | 18mm birch plywood |
Finish | Polyurea Finish | Polyurea Finish |
Grille | Powder coated, black, 16-gauge perforated steel with acoustically transparent foam | Powder coated, black, 16-gauge perforated steel with acoustically transparent foam |
Dimensions Net | 349mm*597mm*444mm | 508mm*597mm*749mm |
Net Weight | 32KG | 51kg |
More setails of our VRX932LAP active speaker:1.ABS plastic horn, made by moudle.
2.Birch plywood cabinet:25mm side, 18mm other parts, 13-ply birch plywood.3.3PCS 2408H neodymium 1.5inch tweeter
4.1PCS 2262HPL 12inch neodymium magnet:Different Drive. Neodymium magnet. Dual voice coil. Imported paper cone. Aluminum frame. 150degrees heat-resistant5.Imported polyurea paint--Anticorrosive, waterproof, scratch-resistant, environmental without bad smell.Customer Good comment:
VRX-AF specification |
Model | VRX-AF |
Name | line array frame kit |
component | 1x center frame 2 x side arms 4x quick release pins 2 x drop levers |
material | aluminum |
Packing size (carton) | 73*28*12CM/PCS |
Packing gross weight | 4KG/PCS |
please use speaker numbers according to following table |
maximum number of VRX918S in array | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
maximum number of VRX932LA-1 in array | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|
maximum number of VRX918SP in array | 0 | 2 | 3 | 3 | 4 | 4 | |
maximum number of VRX932LAP in array | 5 | 4 | 3 | 2 | 1 | 0 | |
Welcome to visit our website for more details:
skytoneaudio.en.made-in-china.com
Address:
Yilong Industrial Zone, Baiyun District, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics
Company Introduction:
Guangzhou Skytone Audio Co., Limited, was founded in 2004. Our office is located in the beautiful, bustling Guangzhou City, in Yilong Industrial Zone, Baiyun District, near Baiyun Lake, with 1000 square meters company.
And our factory is located in Panyu district, Guangzhou city with more than 2000 square meters.
Skytone is White hair in PRO Audio business. We are specialized in professional loudspeakers, karaoke speakers, amplifiers and other audio peripheral such as microphone, mixer, equalizer, compressor, ect.
Quality is Skytone′s culture. Our company gains a good reputation with good management mechanism, advanced technology, strong force of R&D, excellent quality and perfect after-sales services. There are many departments in our company including R&D, engineering, production, marketing, after-sales services and personnel.
To meet market developments and customers′ needs, our company will continue to improve the product structure, operational management, as well as comprehensive quality of the staff. With brand-new products, vigorous power and stable paces, we will work hand-in-hand with customers home and abroad to create brilliant future!
Making your world sound better!