| Customization: | Available |
|---|---|
| Noise: | <95dB |
| Hi-Fi: | Hi-Fi |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
SRX715 Inside used neodymium speaker 
| Model | SRX715 |
| System type | Single 15" loudspeaker |
| Frequency Range | 43 Hz - 20 kHz |
| Frequency Response | 53 Hz - 20 kHz |
| Coverage Pattern | 75° x 50° nominal |
| Operation Modes | Bi-amp / passive |
| Crossover Frequency | 1.2 kHz |
| Power Rating | 800 W / 1600 W / 3200 W |
| Maximum SPL | 131 dB SPL peak |
| System Sensitivity (1w @ 1m) | 96 dB SPL(passive mode) |
| LF Driver | 1 x 2265HPL 380 mm (15 in) neodymium woofer |
| HF Driver | 1 x 2431H (3 in) neodymum tweeter |
| Nominal Impedance | Passive: 8 ohms |
| Bi-amp LF: 8 ohms | |
| Bi-amp HF: 8 ohms | |
| Cabinet material | Birch plywood |
| Finish: | Black polyurea paint |
| Recommend amplifier | I--tech 9000 (2X1050Watts) Digital |
| Warranty | 1 year (Non-artificial damage) |
| Dimensions | 711 x 439 x 406 mm |
| Net Weight: | 22kg |
| Model number | GW60 |
| Rated power (8ohm) | 2x1300W |
| Rated power (4ohm) | 2x2400W |
| Rated power (2ohm) | 2x4200W |
| Total harmonic distortion | <0.05% |
| Signal-to-noise ratio | 112dB(A-weighting) |
| Frequency response | 20 Hz-20kHz(±0.25dB) |
| Damping coefficient | >1000 |
| Conversion rate | 50V/us |
| Input impedance | Balanced 20k ohm/ unbalanced 10K ohm |
| Input sensitivity | 0.775V |
| Dc residue | <5mV |
| Operating voltage | 200V-264V±10%,50/60HZ |
| Power factor cos(Φ) | >0.95@>500W |
| Maximum output voltage/current | 110 V peak/60A peak |
| Power technology | Standard switching mode with PDC(power factor correction) |
| Product size | 482x260X44MM |
| Package size | 545x365x70MM |
| Net/gross weight | 4KG,5.5KG/4.7KG,6.2KG |
| Technical parameter | |
| Model | A20 |
| Carrier frequency range | 520MHz-960MHz (depending on applicable national regulations) |
| Circuit mode | True diversity circuit design |
| Bandwidth | 2X25MHz |
| Modulation mode | FM frequency modulation |
| Maximum frequency offset | +50KHz |
| Frequency response | 50HZ-16.5KHz |
| Signal to noise ratio (S/N) | >105dB |
| Distortion (1KHz) | <0.3% |
| Working temperature | -10°C-55°C |
| Working distance | 150 meters (ideal environment) |
| RF power output | Maximum 30μW (depending on applicable national regulations) |
| Oscillation mode | (Digital frequency synthesizer) |
| Transmission frequency stability | <30ppm |
| Dynamic range | >100dB |
| Frequency response | 50Hz-16.5KHz |
| Maximum input sound pressure | 130dB SPL |
| Microphone pickup head | Dynamic coil type |
| Power | 2 AA type batteries (1.5V) |
| Technical parameters: |
| 1. Microphone input: 8 channels (8 dual XLR ports) |
| 2. Line input: 8-channel single plug mono channel |
| 3. Provide 4 rows of level lights |
| 4. The branch channel is equipped with voltage limit control |
| 5. Output Channels: 4 sets of auxiliary outputs, 4 sets of outputs, 1 set of stereo monitoring outputs, 1 set of headphone monitoring outputs, and 1 set of subwoofer outputs |
| 6. Effect generator: 199 bit DSP effect generator |
| 7. Phantom power supply: Each microphone input interface comes with a 48V phantom power supply |
| 8. Frequency response: 20Hz-20kHz, ± 3dB |
| 9. Distortion:<0.003% (A-weighted) |
| 10. Microphone equalization input noise: -119dB (A-weighted) |
| 11. Common mode rejection ratio: 60dB |
| 12. Single channel input gain: MIC: 0 to 48dB, LINE: -33 to+15dB |
| 13. Stereo channel input gain: LINE: -8 to+6dB |
| 14. Main mix crosstalk: -87dBu (A-weighted) |
| 15. Channel crosstalk: -85dBu (A-weighted) |
| 16. Maximum output level:+20dBu |
| 17. MIC input high pass filtering: 75Hz, 18dB/oct |
| 18. Single channel equalization: High frequency: ± 15dB@12KHz Mid frequency: ± [email protected] Low frequency: ± 15dB@80Hz |
| 19. Power supply: Built in switch power adapter 110-220V, 30W |
| 20. Power consumption: ≤ 23W |
| 21. Size (L x W x H): 365 x 475 x 80mm |
| 22. Weight: 4.95kg |
| 23.Packing 580x470x170mm |
| 24.Gross weight:6.55kg |
Other Sound system real photos
