Vera36+ Active Line Array Powered Dual 12 Inch Speaker Drivers Professional Audio Line Array System

Product Description

VERA36+ Active Line Array Powered Dual 12 Inch Speaker Drivers Professional Audio Line Array System

This is a complete sound system for selling

Complete sound system including following items:
16PCS VERA36+ dual 12 inches line array speaker
8PCS STX828S dual 18 inches subwoofers
8PCS SRX812 single12 inches stage monitors
Amplifiers for VERA36+ line array
Amplifiers for STX828S subwoofer
Amplifiers for SRX812 stage monitor
2PCS flying bar for VERA36+
4SETS ATX400+ wireless handheld microphone
2PCS DSP0408 digital processor
2PCS DF18 power sequencer
Rack case for amp, mic, processor, power sequencer
Speakers Cables
Signal cable
Speakons for speaker
XLR connectors
Cable case
 

Product details:

SKYTONE VERA36+ 3-way Medium to Large-scale Stage line array

High performance 3-way
passive line array loudspeaker

Max. sound pressure 142 dB
Protecting by steel grille
18mm thickness birch plywood
Widely coverage

Strong sound pressure at long distance, high definition and wide coverage,suitable for medium to large-scale stage performances,allowing music to be heard throughout the stage

VERA36+ inside components

VERA36+ dual 12 inches line array built-in 5 units components, which is a 3-way high performance outdoor line array speakers.

5 units built-in
HF tweeter speaker

2x2.5"(65mm)Titanium compression driver
Installed on a widely waveguide
Neodymium magnet tweeter, clear, bright sound without noise,have a strong layering feeling ,gentle and melodious sound,Strong powerful and shock your heart

Mid-range
1x8"(210mm) Ferrite MF driver

LF
2x12"(311mm)neodymium woofer
2PCS Neodymium magent woofer speaker
Differential Drive
Dual 3 inches voice coil
 

VERA36+ Specification
 

VERA36+ dual 12 inch line array speaker box
Model	VERA36+
System type	2x12" LF + 2x2.5" HF  +1x8"MF
Frequency range (-10dB)	55-20000Hz
Power (RMS/Continuous/Peak)	LF driver: 1600W/3200W/6400W; MF driver: 250W/500W/1000W HFdriver:  200W/400W/800W
Impedance	LF: 8 Ohm; MF: 8 Ohm; HF: 8 Ohm
LF driver	12 inch 800W 8ohm x 2 PCS  neodymium
MF driver	8 inch 250W 8ohm x1PCS   ferrite
HF driver	2.5 inch 100W 8ohm x 2 PCS  neodymium
Coverage pattern	80o x 10o
System Sensitivity (1w/1m)	102 dB LF ; 110 dB HF
Maximum SPL	142 dB HF
Input connectors	2 speakon NL8
Finish	Polyurea paint
Cabinet	Birch plywood
Dimension ( H x W x D)	402x918x450 mm
Net Weight	41 KG
Package size (carton)	101x47x55cm
Gross weght (carton)	44KG
Package size (flight case)	99x65x52cm
Gross weght (flight case)	64 KG

STX828S subwoofer
 

STX828S subwoofer

Dual 18 inch subwoofer speaker
Inside components are ferrite magent

High power
2000W rated power, 4000W peak power

Features:
1. 18 inches Super Woofer for extended low-frequency output.
2. Large port area for reduced distortion.
3. Imported polyurea paint 
4. 14-Gauge steel grille lined with acoustically transparent cloth.

STX828S subwoofer Specifications

Model	STX828S
System type	2 way 2X18" subwoofer
Frequency Range ( -10 dB)	32 Hz-250 Hz
Frequency Response (± 3 dB)	37 Hz-120 Hz
Sensitivity (1W/1m)	99 dB
Power Rating	2000 W / 4000 W / 8000 W
	(Continuous/Program/Peak)
Rated Maximum SPL	138 dB SPL Peak
Nominal Impedance	4Ω
Input Connectors	Two NL4
Operational Modes	Subwoofer
Paint	564 mm x 1137 mm x 714 mm
Cabinet	Imported polyurea paint
Recommend amplifier	18mm birch plywood
Warranty	I--tech 18000 (2X1800Watts) Digital amplifier
Dimensions (H x W x D)	564 mm x 1137 mm x 714 mm
Net Weight	82KG

SRX812 stahe monitor Specifications

SRX812 is a two-way full range passive portable speaker with a 12" woofer made for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor standing and monitor use, the SRX812 is an ideal solution for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship

Features :
1. Light weight 
2. Neodymium magnet speakers provided high-power capacity
3. Bi-Amplified or full-range passive operation
4. Dual-angle pole socket for applications requiring tripod mounting.
5. Equipped with birch plywood cabinet, CNC-machined 
6. Painted environmental water-based paint
7. Fantastic nice sound quality

SRX812 stahe monitor Specifications

System Type	Passive 12", two-way, bass-reflex
Maximum SPL Output	123dB (Continuous), 129dB (Peak)
Frequency Range (-10dB)	41hz - 20khz
Frequency Response (-3 dB)	57hz - 20khz
Sensitivity	94dB
System Power Rating	3200W Peak, 1600W Program, 800W Continuous
Nominal Impedance	8 Ohm
Inputs	NL4 Input, NL4 Loop-thru (+/-1 or +/-2 Selectable)
Operational Modes	Passive/Bi-Amp
LF Driver	2262HPL 12 inch neodymium woofer
HF Driver	2432H 3 inch neodymium tweeter
Coverage Pattern	90 x 50
Crossover Frequency	1.9khz
Enclosure	18mm plywood
Monitor Angle	50°
Suspension/Mounting	36mm pole socket, 12 x M10 Suspension points
Handles	3
Finish	Water-based environmental paint
Grille	Powder coated,14-gauge perforated steel with acoustically transparent black cloth backing
Dimensions (H x W x D)	572mm x 361mm x 380mm
Weight	16.5kg
Shipping Weight	19kg

Amplifier for VERA36+ HF and MF speaker

High-quality, large-capacity, high-voltage electrolytic capacitors

DTD power amplifiers built-in 40PCS 80V(1000uf) large-capacity capacitors, the sound is sweet and natural, transparent and powerful.

Stable performance providing long service life.

 

Japan TDK magnetic core high frequency high power transformer

Ultra high frequency dual high-power switching power supply, full bridge voltage stabilized drive technology, small size with stable output voltage

Specification

Specification		DTD 4x0.4	DTD 4x0.7	DTD 4x1.0	DTD 4x1.3
Output power 1kHz,THD<1%	8 ohms Stereo	400W X 4	700W X 4	1000W X 4	1300W X 4
	4 ohms  Stereo	800W X 4	1400W X 4	2000W X 4	2600W X 4
	2 ohms Stereo	1600W X 4	2800W X 4	4000W X 4	5200W X 4
	8 ohms Bridge	1200W X2	2100W X2	3000W X2	3900W X2
Frequency response		20Hz-20KHz	20Hz-20KHz	20Hz-20KHz	20Hz-20KHz
Sensitivity		0.775v/26dB	0.775v/26dB	0.775v/26dB	0.775v/26dB
String sound attenuation		≥62dB	≥60dB	≥60dB	≥60dB
Phase response		≤±6.5°	≤±6.5°	≤±6.5°	≤±6.5°
Conversion rate		≥60V/μs	≥60V/μs	≥60V/μs	≥60V/μs
S/N		≥105dB	≥108dB	≥108dB	≥108dB
Damping factor		≥900	≥900	≥900	≥900
Intermoudulation distortion		≤0.02%	≤0.02%	≤0.02%	≤0.02%
Total harmonic distortion		≤0.03%	≤0.03%	≤0.05%	≤0.06%
Installation space		1U	1U	1U	1U
Size		482×44×220mm	482×44×220mm	482×44×220mm	482×44×220mm
Net weight		4.8kg	4.8kg	5.5kg	5.5kg

Amplifier for VERA36+ LF, SRX812 speaker

90V-265V widely voltage

HQ series 4CH high power digital power amplifier

Energy efficient,Apply to small to middle scale, large-scale performance, stage project, venues,entertainment clubs and other occasions
 

High-quality, large-capacity, high-voltage electrolytic capacitors

HQ power amplifiers built-in 50PCS 160V(470uf) [HQ4025 HQ4035 this 2 models are 50pcs 200V(330uf)] large-capacity capacitors, the sound is sweet and natural, transparent and powerful.

Stable performance providing long service life.

Specification

Specification		HQ4012	HQ4015	HQ4018	HQ4025
Rated power (20Hz-20KHz)	8 ohms Stereo	1200W X 4	1500W X 4	1800W X 4	2500W X 4
	4 ohms Stereo	2400W X 4	3000W X 4	3600W X 4	5000W X 4
	2 ohms Stereo	4800W X 4	6000W X 4	7200W X 4	10000W X 4
Limiting protection		reach at 10V	reach at 10V	reach at 10V	reach at 10V
Frequency response		20Hz-20KHz(±0.1dB)	20Hz-20KHz(±0.2dB)	20Hz-20KHz(±0.3dB)	20Hz-20KHz(±0.3dB)
Sensitivity		0.775v/26/32dB	0.775v/26/32dB	0.775v/26/32dB	0.775v/26/32dB
T.H.D		<0.02%@8Ω1KHZ	<0.03%@8Ω1KHZ	<0.03%@8Ω1KHZ	<0.06%@8Ω1KHZ
String sound attenuation		≥75dB	≥65dB	≥+60dB	≥+60dB
Phase response		≤±1.5°	≤±2°	≤±3°	≤±3°
Conversion rate		≥50V/μs	≥50V/μs	≥50V/μs	≥50V/μs
S/N		≥108dB	≥107dB	≥105dB	≥105dB
Damping factor		≥800	≥800	≥800	≥900
Intermoudulation distortion		≤0.02%	≤0.02%	≤0.02%	≤0.02%
Installation space		1U	1U	1U	1U
Size		482×44×380mm	482×44×380mm	482×44×380mm	482×44×380mm
Net weight		9.2kg	9.2kg	9.2kg	9.5kg

Amplifier for STX828S speaker

90V-265V widely voltage

HQ series 4CH high power digital power amplifier

Energy efficient,Apply to small to middle scale, large-scale performance, stage project, venues,entertainment clubs and other occasions
 

High-quality, large-capacity, high-voltage electrolytic capacitors

HQ power amplifiers built-in 82PCS 220V large-capacity capacitors, the sound is sweet and natural, transparent and powerful.

Stable performance providing long service life.

Specification

Specification		HQ48
Rated power (20Hz-20KHz)	8 ohms Stereo	4800W X 2
	4 ohms  Stereo	9600W X 2
	2 ohms Stereo	19200W X 2
Limiting protection		reach at 10V
Frequency response		20Hz-20KHz(±0.3dB)
Sensitivity		0.775v/26/32dB
T.H.D		<0.03%@8Ω1KHZ
String sound attenuation		≥+60dB
Phase response		≤±3°
Conversion rate		≥50V/μs
S/N		≥105dB
Damping factor		≥900
Intermoudulation distortion		≤0.02%
Installation space		1U
Size		482×44×380mm
Net weight		9.2kg

DSP0408 4 inputs  8outputs digital processor

Features

1. 4 channels analog audio inputs and 8 channels analog audio outputs

2. 96k24bit sampling rate

3. Input standard 4X512Taps FIR filter

4. Input 15 bands of PEQ and output 10 bands of PEQ

5. Output standard 8 X512Taps FIR filter

6. Standard DEQ dynamic balancing

7. Maximum 20dBu input/output, -90dB noise floor, signal-to-noise ratio 113dB (A-weighted)

8. All pass filter ALLpass

9. Support FIR Designer to adjust parameters

10. Support Android system APP TCON

11. Support archive encryption function, convenient for factory preset speaker parameters

12. Support Mconsole software network monitoring and management

13. USB drive free automatic connection software, supporting RS232 central control and TCP/IP LAN remote control

Specification

Model	DSP 0408F
Input / Output	4-in 8-out
Input impendance	10K Ohm
Output impendance	50 Ohm
Max. input / output level	19 dBu
Gain	-40dB ~ +12dB, steps 1dB / 0.1dB
Delay	ON/OFF, 0ms ~ 1000ms,
	steps 105/10.5/1.05/0.105/0.021 (ms)
PEQ bands	1 ~ 15
PEQ Bypass	ON/OFF
PEQ Type	PEQ, Low-shelf 6dB, Low-shelf 12dB,
	High-shelf 6dB, High-shelf 12dB,
	Phase-shifter
PEQ Frequency	19.7Hz ~ 21.9kHz
PEQ Gain	-30dB ~ +15dB , steps 1dB / 0.1dB
Compressor's Knee	Off/Hard Knee/ Soft knee1/
	Soft knee2/ Soft knee3/
	Soft knee4/ Soft knee5
Compressor's Threshold	-20 dB ~ +20 dB, steps 0.5dB
Compressor's Ratio	1.2, 1.5, 2, 3, 4, 6, 10, 20, 40, 128
Compressor's Attack-Time	0 ms ~ 1000 ms , steps 1ms
Compressor's Release-Time	50 ms ~ 1000 ms , steps 50ms
High/Low-Pass	19.7Hz ~ 21.9kHz
Filter Frequency	19.7Hz ~ 21.9kHz
High/Low-Pass Filter Solpe	Flat THRU, 12dB, 24dB, 36dB, 48dB
High/Low-Pass Filter Types	Bessel,Butterworth,Linkwitz-Riley,
Dynamic range	116dB A Weighting
Separation degree	< -100dB
Distortion	0.003% (1kHz, 0 dBu)
System preset	10 entry presets, 30 user programs
Power Supply	AC 90V - 250V, 50HZ -60Hz
Weight	2.5kg
Dimension	482mm x 158mm x 45mm

ATX400+ handheld wireless microphone

Features:

1. Adopt microcomputer CPU control

2. PLL (phaselocked loop) frequency synthesis technique

3. Supporting up to 4 compatible systems in 1 frequency band.

4. True diversity receiver (dual tuned high frequency receiver)

5. 1-button full frequency radar scan

Specification

Receiver(Host):

Frequency range: 555-580 MHz

610-690 Mhz

803-806 Mhz

905-930 Mhz

Receiving sensitivity: -94dBm for 30dB

Mirror suppression:>60dB

Frequency stability: ± 0.005%

Modulation method: FM

Maximum frequency offset: ± 45KHz

Audio response: 50Hz -18KHz (± 3dB)

Signal to noise ratio:>105dB

Dynamic range>100dB

System distortion:<0.5%

Working temperature: -10 ° C~55 ° C

Power supply: 12-18V DC 600mA

Handheld Transmitter(MicroPhone):

Frequency range: 555-580 MHz

610-690 Mhz

803-806 Mhz

905-930 Mhz

Harmonic radiation:<-63dBm

Band width: 40MHz

Maximum input sound pressure: 130dB SPL

Current consumption:<110 mA

Transmission power: 30mW

Frequency response: 50Hz -18KHz

Power supply: 2x1.5V AA battery

 

Welcome to inquiry, please do feel free if any questions